Racepak : Emission Code: 5: Model: 230- VM -EFIHOL: Product Type: Modules: Part Number: 230- VM -EFIHOL: Emissions. 5. This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions …
Part Number: 230- VM -EFIHOL Holley Dominator CAN Interface Module Description: The Holley Dominator interface module is used to convert the CAN data stream from the ECU into a CAN bus data stream compatible with the RacePak V_Net System. Data from the module is.
The EFI Technology interface module is used to convert the data stream from the EFI Tech data stream in to a format compatible with the RacePak V-Net System. Data from the module is then available for use with the full range of RacePak V-Net devices including on board displays, real time telemetry, and data logging applications.
format compatible with the RacePak V_Net System. Data from the module is then available for use with the full range of RacePak V_Net devices including on board displays, real time telemetry, and data logging applications. Module Installation: The V_Net connector module can be inserted at any location in the V_Net data bus in your vehicle.
The new Universal EFI Interface Module from Racepak streams CAN-based data from aftermarket ECU systems to any Racepak data logger or dash display. This gives the ability to view and record all of the data available from the ECU. To see if your ECU is currently supported, please check the Compatible ECU Systems tab below.
1. Connect the Racepak programming cable between your PC’s USB port and communication port on your Racepak data logger or dash 2. Open the DataLink software* and select File from the main menu area located across the upper area of the screen 3. Select Open Car Configuration from the pull down menu. 4. A Select Configuration dialog window will …
This kit is used to directly connect Racepak part number 230- VM -EFIHOL Vnet/Holley to either the J1A (HP and Dominator ECUs) or J3 (Dominator ECU only) connectors.
Find Racepak EFI V-Net Interface Module Cables 230- VM -EFIAEM and get Free Shipping on Orders Over $99 at Summit Racing! Racepak EFI V-Net Interface module cables are used to convert the serial data stream for an AEM EMS unit into a CAN bus data stream compatible with the RacePak V-Net System. Data from the module is then available for use with the full range of RacePak V-Net devices.
1/1/2019 · So I’m sure this has probably been covered before, but my search skills have failed me and I’m coming up empty. I need to know what exactly I need to interface a Racepak UDX dash with the Dominator ECU. I would assume on the Racepak side, I’ll need the 230- VM -EFIHOL cable. Does that plug directly in to the CAN connector on J1A or is there an additional cable that I need on the Holley.
11/18/2014 · May God’s grace bless you in the Lord Jesus Christ. ’92 Ford Mustang GT: 385 SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623 lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12 …
